Overview
INJ 1100-T PoE Injectors are DIN Rail mounted single port, PoE mid-span injectors. They act as an intermediary devices between a non-PoE switch and a PoE device to inject fully compliant power over the Ethernet cable. With electrical isolation of the internal power supply, the INJ-1100-T units are also protected against short circuits on the PoE side.
Generating up to 60 Watts, the INJ 1100-T provides electrical power to remote PD access points, pan-tilt and zoom (PTZ) cameras and video-phones. It complies with the IEEE802.3bt Hi-PoE (60W of power) or IEEE 802.3at PoE+ (30W of power) standards and is also backward compatible with IEEE802.3af PoE (15.4W of power). Learn more about PoE.
With the INJ 1100-T, there is no need to buy an expensive PoE switch or install electrical wiring and outlets in hard to reach locations. Just use and open port on an existing non-PoE switch to save time and money by sending power and data over the same cable.
INJ 1000 PoE Injector Benefits
|
DIN Rail Enclosure |
Easily mount on a DIN rail or inside distribution boxes using native DIN Rail enclosure with grounding clip. No need for add-on brackets. |
|
Power Over Ethernet (PSE) |
Performs the Power Sourcing Equipment ( PSE ) function on 1 UTP port for IEEE 802.3af (up to 15.4 watts PoE), IEEE 802.3at ( up to 30 watts PoE+ ) or IEEE802.3bt (up to 60 watts Hi-PoE) compliant devices. |
|
Electrical isolation of the internal power supply unit |
The supply voltage and Power over Ethernet port are electrically isolated. This provides optimum protection against short circuits in the data cables on the field side. The passive network isolator protects Ethernet devices from potential differences of up to 4 kV.
|
|
Potential Separation |
Safe shield connection to ground potential |
|
On-board PoE Power Controller |
This PoE power controller provides compliant power provisioning and monitoring, properly sensing through signature detection whether or not the attach Ethernet devices are PoE capable or not. This provides a safe connection for both PoE and Non-PoE capable devices. Click here for more details |
|
Advanced Power Management |
|
Hardware Specs
| INJ 1100-T 27030098 |
INJ 1110-T 27030108 |
|
|---|---|---|
| Serial interface | ||
| Interface 1 | Ethernet | |
| Connection method | RJ45 socket | |
| Transmission length | 100 m (including patch cables) | |
| Pin assignment | 1:1 | |
| Basic functions | PSE/Midspan, compliant with IEEE 802.3af, at | |
| Serial transmission speed | 10/100/1000 Mbps | |
| Output nominal voltage | 54 V DC (PoE) | |
| Output power | 30 W | 60 W |
| Maximum output power | 40 W | 75 W |
| Interface 2 | Ethernet | |
| Connection method | RJ45 CAT5e | |
| Ambient conditions | ||
| Ambient temperature (storage/transport) | -40°C … 85°C | |
| Permissible humidity (operation) | 10 % … 95 % (non-condensing) | |
| General | ||
| Electrical isolation | VCC // FE // PoE | |
| Test voltage data interface/power supply | 1.5 kV AC (50 Hz, 1 min.) | |
| Electromagnetic compatibility | Conformance with EMC Directive 2014/30/EU | |
| Mounting position | vertical | |
| Net weight | 324.72 g | |
| Housing material | Plastic | |
| Color | Gray | |
| MTTF (SN 29500 standard, temperature 25 °C, operating cycle 21 % (5 days a week, 8 hours a day)) |
2342 Years | 3062 Years |
| MTTF (SN 29500 standard, temperature 40 °C, operating cycle 34.25 % (5 days a week, 12 hours a day)) |
1167 Years | 1397 Years |
| MTTF (SN 29500 standard, temperature 40 °C, operating cycle 100 % (7 days a week, 24 hours a day)) |
467 Years | 558 Years |
| Conformance | CE-compliant | |
| UL, USA | UL 60079-0 Ed. 6 / UL 60079-15 Ed. 4 | |
| UL, USA/Canada | Class I, Zone 2, AEx nA IIC T4, Ex nA IIC Gc X T4 | |
| Class I, Division 2, Groups A, B, C, D | ||
| UL, Canada | CSA 22.2 No. 60079-0 Ed. 3 / CSA 22.2 No. 60079-15:16 | |
| Standards and Regulations | ||
| Electromagnetic compatibility | Conformance with EMC Directive 2014/30/EU | |
| Type of test | Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 | |
| Test result | 10 Hz … 57 Hz, amplitude ±3.5 mm, 57 Hz … 150 Hz, 5g | |
| Type of test | Shock in acc. with EN 60068-2-27/IEC 60068-2-27 | |
| Test result | 30g for 11 ms, three shocks in each spatial direction | |
| Type of test | Continuous shock according to EN 60068-2-27/IEC 60068-2-27 | |
| Test result | 10g for 16 ms, 1000 shocks in each spatial direction | |
| Standards/regulations | EN 61000-4-2 | |
| Contact discharge | ± 6 kV (Test Level 3) | |
| Indirect discharge | ± 6 kV | |
| Standards/regulations | EN 61000-4-3 | |
| Frequency range | 80 MHz … 3 GHz (Test Level 3) | |
| Standards/regulations | EN 61000-4-4 | |
| Comments | Criterion B | |
| Standards/regulations | EN 61000-4-5 | |
| Signal | ± 1 kV (Data line, asymmetrical) | |
| ± 2 kV (I/O cable on field side only, asymmetric) | ||
| Standards/regulations | EN 61000-6-4 | |
| EN 61000-4-6 | ||
| Frequency range | 0.15 MHz … 80 MHz | |
| Conformance | CE-compliant | |
| UL, USA | UL 60079-0 Ed. 6 / UL 60079-15 Ed. 4 | |
| UL, USA/Canada | Class I, Zone 2, AEx nA IIC T4, Ex nA IIC Gc X T4 | |
| Class I, Division 2, Groups A, B, C, D | ||
| UL, Canada | CSA 22.2 No. 60079-0 Ed. 3 / CSA 22.2 No. 60079-15:16 | |
| Noxious gas test | ISA-S71.04-1985 G3 Harsh Group A | |
| Dimensions | ||
| Width | 30.2 mm | |
| Height | 130 mm | |
| Depth | 120 mm | |
| Note | ||
| Utilization restriction | 1 | |
| Power supply | ||
| Nominal supply voltage | 24 V DC | |
| 48 V DC | ||
| Supply voltage range | 18 V DC … 57 V DC | |
| Max. current consumption | 2.1 A | 4.2 A |
| 1.4 A (24 V DC) | 2.73 A (24 V DC) | |
| 0.7 A (48 V DC) | 1.34 A (48 V DC) | |
| Power consumption | ≤ 75 W | |
| Protective circuit | Reverse polarity protection | |
| Conductor cross section flexible max. | 4.00 mm² | |
| Conductor cross section flexible min. | 0.75 mm² | |
| Conductor cross section solid max. | 4.00 mm² | |
| Conductor cross section solid min. | 0.75 mm² | |
| Conductor cross section AWG max. | 12 | |
| Conductor cross section AWG min. | 20 | |
| Environmental Product Compliance | ||
| REACH SVHC | Lead 7439-92-1 | |
| China RoHS | Environmentally friendly use period: unlimited = EFUP-e | |
Diagrams
| Easily Mount your PoE Injector on a DIN Rail |
|---|
 
|
| INJ 1100-T PoE Injector Dimensional drawing of Compact housing |
|
Two RJ45 Sockets 
|
| INJ 1100-T PoE Injector Front View |
|
Two RJ45 Sockets 
|