IDS-105F Industrial Ethernet Switch (5 port Compact DIN Rail Switch) // CENTER4

IDS-105F Industrial Ethernet Switch (5 port Compact DIN Rail Switch)

5 port 10/100Base-TX ( RJ45 )
4 port 10/100Base-TX ( RJ45 ) with an SC/ST fiber port
Hazardous Location and Industrial Control Equipment Certification
Corrosion resistant IP30 aluminum case
Redundant dual power input 12/24/48 VDC, 18 to 30 VAC
Overload current and reverse polarity protection
Industrial operating temperature support up to -40 to 75C

Jetzt unverbindlich anfragen!

Preise, Verfügbarkeit oder individuelle Beratung unverbindlich anfragen.

[elfsight_form_builder id=”1″]

Overview

Perle Industrial-grade Ethernet Switches are designed to stand up to extreme temperatures, surges, vibrations, and shocks found in industrial automation, government, military, oil and gas, mining and outdoor applications.

The IDS-105F 5 port Industrial Ethernet Switch provides advanced performance and enables real-time deterministic network operation. It requires no configuration and will instantly operate as soon as you power it up.

The IDS-105F, which comes in a variety of models, are rugged fan-less switches that are hardened to provide superior reliability in 0 to 60°C, or harsh extended operating temperatures from -40 to 75°C.

Perle has been designing industrial hardware for serial ModBus and Profinet to Ethernet conversion environments for over 35 years and have used this expertise to design the toughest Ethernet switches on the market. Don’t trust your critical communications to commercial switch products. Perle Industrial Ethernet switches give you proven assurance that your system will keep running for years to come.

IDS-105F Industrial Ethernet Switch Features

Rugged design for harsh environments	Corrosion resistant IP30 aluminum case UL508A Industrial Control Equipment Safety certified Hazardous locations – Class1/Div2, ATEX class 1 / Zone 2
Reliable operation	Fan-less, no moving parts Dual power input. Connect to separate power sources for redundancy. Reverse polarity protection Overload current protection Handles vibration and shock conditions found in industrial environments
Real-time Ethernet performance	Fast wire-speed , store and forward switching, non-blocking architecture Auto-sensing for speed and duplex Auto-mdi/mdix-crossover works with straight and crossover cables
FCC Class B Certification	The first and only DIN Rail Switch on the market that can be sold for use in areas that require especially low emissions. No frequency interference with other equipment.

Hardware Specs

Power

Dual
Power
Input

Both inputs draw power simultaneously. If one power source fails, the other live source can, acting as a backup, supply enough power to meet the operational needs of the switch.

12/24/48 VDC Nominal. ( 9.6 to 60 VDC)
18 to 30 VAC

Power

4-Pin Removable Terminal Block.

Connector

Grounding screw on metal chassis

Maximum Current Consumption
@24 vDC

140 mA

Maximum Power
Consumption
@24 vDC

3.4 Watts

Overload
Current
Protection

Reset-able fuse provides overload current protection

Reverse
polarity
protection

The positive and negative inputs can be reversed providing safe and simple power connectivity.

Access Ports

RJ45

4 or 5 shielded RJ45 ports for 10/100Base-TX up to 100 meters ( 328 ft )
Auto-negotiation
Auto-MDI/MDIX-crossover for use with either crossover over straight-through cable types
Ethernet isolation 1500 V

Fiber port

1 x fixed fiber port
Duplex SC or ST connector

Multimode 50/125 or 62.5/125 micron fiber cable
Single mode 9/125 micron fiber cable

Simplex ( BIDI, single strand ) SC connector

Multimode 50/125 or 62.5/125 micron fiber cable
Single mode 9/125 micron fiber cable

PC and UPC type patch cords supported.

Fixed
Fiber
Port
Specs

Fiber1 Type	Transmit (dBm)		Receive (dBm)		Power Budget (dB)	Wavelength (nm)	IEEE	Core Size (um)	Modal Bandwidth (MHz *Km)	Maximum Operating Distance
Fiber1 Type	Min	Max	Min	Max	Power Budget (dB)	Wavelength (nm)	IEEE	Core Size (um)	Modal Bandwidth (MHz *Km)	Maximum Operating Distance
MMF (Duplex SC/ST)	-20.0	-12.0	-31.0	-14.0	11.0	1310	100Base-FX	50	800*	5 Km 3.1 mi
								62.5	500*	4 Km 2.5 mi
								62.5	200	2 Km 1.2 mi
MMF (Simplex SC/ST)	-15.0	0.0	-28.0	-8.0	13.0	1310 / 1550 1550 / 1310	100Base-BX-U 100Base-BX-D	62.5	200	2 Km 1.2 mi
SMF (Duplex SC/ST)	-18.0	-7.0	-32.0	-3.0	14.0	1310	100Base-LX	9	**	20 Km 12.4 mi
SMF (Simplex SC)	-14.0	-8.0	-32.0	-3.0	18.0	1310 / 1550 1550 / 1310	100Base-BX-U 100Base-BX-D	9	**	20 Km 12.4 mi
SMF (Duplex SC/ST)	-5.0	0.0	-34.0	-3.0	29.0	1310	100Base-EX	9	**	40 Km 24.9 mi
SMF (Simplex SC)	-8.0	-3.0	-33.0	-3.0	18.0	1310 / 1550 1550 / 1310	100Base-BX-U 100Base-BX-D	9	**	40 Km 24.9 mi
SMF (Duplex SC/ST)	-5.0	0.0	-34.0	-3.0	29.0	1550	100Base-ZX	9	**	80 Km 4.79 mi
SMF (Duplex SC/ST)	0.0	5.0	-35.0	-3.0	35.0	1550	100Base-ZX	9	**	120 Km 74.6 mi

* 1db/km multimode fiber cable

** as per ITU-T G.652 SMF specifications

Switch Properties

Standards

IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX and 100Base-FX
IEEE 802.3x for Flow Control

Processing Type

Store and Forward, non-blocking architecture

MAC Address Table Size

1024

Packet Buffer Memory

512 Kbit

Indicators

This green LED is turned on when power is applied to the power #1 input

This green LED is turned on when power is applied to the power #2 input

RJ45 Ethernet

These integrated colored LEDs indicate link, activity and speed for each port.

Fiber Link

Fiber link LED indicates Link and Data Activity

Environmental Specifications

Operating Temperature Ranges

Standard temperature models : 0° C to 60° C (32° F to 140° F).
Industrial extended temperature models : -40° C to 75° C ( -40 F to 167° F )

Storage Temperature Range

Minimum range of -25° C to 70° C (-13° F to 158° F). -40 C to 85 C (-40 F to 185 F) for industrial extended temperature models

Operating Humidity Range

5% to 90% non-condensing

Storage Humidity Range

5% to 95% non-condensing

Operating Altitude

Up to 3,048 meters (10,000 feet)

Chassis

Aluminum with an IP30 ingress protection rating

Din Rail Mountable

DIN Rail attachment included. Mounts to standard 35 mm DIN rail in accordance with DIN EN 60175.
Removable to accommodate optional Panel/Wall mount kit

Maximum Heat Output

11.6 BTU/Hr

MTBF

913,428 hours (without fiber module)
717,100 hours (with fiber module)
MTBF Calculation model based on MIL-HDBK-217-FN2 @ 30 °C

Product Weight and Dimensions

Weight

0.19 kg, 0.3 lbs

Dimensions

30 x 115 x 70 mm, 1.18 x 4.52 x 2.76 inches

Packaging

Shipping Weight

0.34 kg, 0.8 lbs

Shipping Dimensions

170 x 260 x 70 mm, 6.69 x 10.24 x 2.76 inches

Contents Shipped

Industrial Ethernet Switch with DIN Rail attachment
Terminal block
Installation guide

Standards and Certifications

Safety

UL 60950-1
CSA C22.2 No. 60950-1
IEC 60950-1:2005+A1:2009 and
EN 60950-1:2006+A11:2009+A1:2010+A12:2011
CE Mark
UL508 ( Industrial )

EMC Emissions

FCC 47 Part 15 Class B
ICES-0003
CISPR 22:2008/EN55022:2010 (Class B)
EN61000-6-4

EMC Immunity

CISPR 24:2010/EN 55024:2010
IEC/EN 61000-4-2 (ESD) : Contact discharge +/- 6kV, Air Discharge +/- 8kV
IEC/EN 61000-4-3 (RS) : 80 MHz to 2.7 Ghz ; 10V/m, 800 MHz to 1000 MHz; 20V/m
IEC/EN 61000-4-4 (EFT) : DC power line +/- 2 kV, Data Line +/- 2kV
IEC/EN 61000-4-5 (Surge) : DC power line, Line/Line +/- 1kV, Line/Earth +/- 2kV, Data Line line/earth +/- 1kV
IEC/EN 61000-4-6 (CS) : 150kHz to 80 MHz; 10V
IEC/EN 61000-4-8 (Magnetic Field): 30 A/m
IEC/EN 61000-6-2 ( General Immunity in Industrial Environments )

Industrial Safety

UL508 (Safety standard for Industrial Control Equipment )
CSA C22.2 No. 142

Hazardous Locations
( Hazloc )

ANSI/ISA 12.12.01, Class I Division 2 Groups A-D ( formerly known as UL 1604 )
CSA C22.2 No. 213
ATEX Class I Zone 2, EN60079-0,15

Laser Safety

EN 60825-1:2007
Fiber optic transmitters on this device meet Class 1 Laser safety requirements per IEC-60825 FDA/CDRH standards and comply with 21CFR1040.10 and 21CFR1040.11.

Environmental

Reach, RoHS and WEEE Compliant

Other

ECCN: 5A991

HTSUS Number: 8517.62.0050

5 year warranty

Mechanical Drawings

IDS-105F with Standard DIN Rail
Click on image to see larger version
IDS-105F with Optional Wall/Panel Mount Brackets
Click on image to see larger version

Application Diagrams

IDS-105F Industrial Switch Diagram

Single Mode / Single Strand ( WDM ) Fiber
Connecting devices over a single fiber strand ( also referred to as “Bi-Directional” BiDi or Simplex) To reduce costs, or where there are limits on available fiber, Wavelength-Division Multiplexing (WDM) technology may be utilized. WDM uses separate transmit and receive frequencies to communicate on a single fiber strand. WDM technology relies on the fact that optical fibers can carry many wavelengths of light simultaneously without interaction between each wavelength. Thus, a single fiber can carry many separate wavelength signals or channels simultaneously. WDM systems are divided into different wavelength patterns, conventional/coarse (CWDM) and dense (DWDM). When Single Strand fiber is used, you will need an “Up” side and a “Down” side when interconnecting fiber devices. Perle offers a wide variety of Single Fiber (“Up/Down”) Ethernet Switches and Media Converters for use with single strand of fiber.

IDS-105F Industrial Switch Diagram

IDS-105F Industrial Switch Network Diagram

Single Mode / Single Strand ( WDM ) Fiber

Connecting devices over a single fiber strand ( also referred to as “Bi-Directional” BiDi or Simplex)

To reduce costs, or where there are limits on available fiber, Wavelength-Division Multiplexing (WDM) technology may be utilized. WDM uses separate transmit and receive frequencies to communicate on a single fiber strand. WDM technology relies on the fact that optical fibers can carry many wavelengths of light simultaneously without interaction between each wavelength. Thus, a single fiber can carry many separate wavelength signals or channels simultaneously. WDM systems are divided into different wavelength patterns, conventional/coarse (CWDM) and dense (DWDM).

When Single Strand fiber is used, you will need an “Up” side and a “Down” side when interconnecting fiber devices.

Perle offers a wide variety of Single Fiber (“Up/Down”) Ethernet Switches and Media Converters for use with single strand of fiber.

Ordering

Select a Model to obtain a Part Number – IDS-105F

Std = Standard Temperature models : 0° C to 60° C (32° F to 140° F).
Ind = Industrial Extended Temperature Models : -40° C to 75° C ( -40 F to 167° F )

Models with 5 x 10/100Base-TX ( RJ45 ) Connectors
Model	Temp
IDS-105F	Std
IDS-105F-XT	Ind

Models with 4 x 10/100Base-TX ( RJ45 ) Connectors
Model	Temp	Choose your Fiber Connection from the table below 100Base-X Duplex Fiber
		Fiber Connector	Transmit (dBm)		Receive (dBm)		Power Budget (dB)	Wavelength (nm)	Fiber Type	Operating Distance
		Fiber Connector	Min	Max	Min	Max	Power Budget (dB)	Wavelength (nm)	Fiber Type	Operating Distance
IDS-105F-M2SC2	Std	1 x Duplex SC	-20.0	-12.0	-31.0	-14.0	11.0*	1310	MMF	5 km* (3.1 mi)
IDS-105F-M2SC2-XT	Ind	1 x Duplex SC	-20.0	-12.0	-31.0	-14.0	11.0*	1310	MMF	5 km* (3.1 mi)
IDS-105F-M2ST2	Std	1 x Duplex ST	-20.0	-12.0	-31.0	-14.0	11.0*	1310	MMF	5 km* (3.1 mi)
IDS-105F-M2ST2-XT	Ind	1 x Duplex ST	-20.0	-12.0	-30.0	-14.0	10.0*	1310	MMF	5 km* (3.1 mi)
IDS-105F-S2SC20	Std	1 x Duplex SC	-18.0	-7.0	-32.0	-3.0	14.0	1310	SMF	20 km (12.4 mi)
IDS-105F-S2SC20-XT	Ind	1 x Duplex SC	-18.0	-7.0	-32.0	-3.0	14.0	1310	SMF	20 km (12.4 mi)
IDS-105F-S2ST20	Std	1 x Duplex ST	-18.0	-7.0	-32.0	-3.0	14.0	1310	SMF	20 km (12.4 mi)
IDS-105F-S2ST20-XT	Ind	1 x Duplex ST	-18.0	-7.0	-32.0	-3.0	14.0	1310	SMF	20 km (12.4 mi)
IDS-105F-S2SC40	Std	1 x Duplex SC	-5.0	0.0	-34.0	-3.0	29.0	1310	SMF	40 km (25 mi)
IDS-105F-S2SC40-XT	Ind	1 x Duplex SC	-5.0	0.0	-34.0	-3.0	29.0	1310	SMF	40 km (25 mi)
IDS-105F-S2ST40	Std	1 x Duplex ST	-5.0	0.0	-34.0	-3.0	29.0	1310	SMF	40 km (25 mi)
IDS-105F-S2ST40-XT	Ind	1 x Duplex ST	-5.0	0.0	-34.0	-3.0	29.0	1310	SMF	40 km (25 mi)
IDS-105F-S2SC80	Std	1 x Duplex SC	-5.0	0.0	-34.0	-3.0	29.0	1550	SMF	80 km (50 mi)
IDS-105F-S2ST80	Std	1 x Duplex ST	-5.0	0.0	-34.0	-3.0	29.0	1550	SMF	80 km (50 mi)
IDS-105F-S2SC120	Std	1 x Duplex SC	0.0	5.0	-35.0	-3.0	35.0	1550	SMF	120 km (75 mi)
IDS-105F-S2ST120	Std	1 x Duplex ST	0.0	5.0	-35.0	-3.0	35.0	1550	SMF	120 km (75 mi)

* 1db/km multimode 50/125 micron fiber cable

Single Fiber ( Simplex / BiDi ) Models Recommended use in pairs

Models with 4 x 10/100Base-TX ( RJ45 ) Connectors
Model	Temp	Choose your Fiber Connection from the table below 100Base-X Simplex ( BiDi ) Fiber
		Fiber Connector	Transmit (dBm)		Receive (dBm)		Power Budget (dB)	Wavelength (nm)	Fiber Type	Operating Distance
		Fiber Connector	Min	Max	Min	Max	Power Budget (dB)	Wavelength (nm)	Fiber Type	Operating Distance
IDS-105F-M1SC2U	Std	1 x Simplex SC	-15.0	0.0	-28.0	-8.0	13.0	1310 / 1550	MMF	2 km (1.2 mi)
IDS-105F-M1SC2D	Std	1 x Simplex SC	-15.0	0.0	-28.0	-8.0	13.0	1550 / 1310	MMF	2 km (1.2 mi)
IDS-105F-M1ST2U	Std	1 x Simplex ST	-15.0	0.0	-28.0	-8.0	13.0	1310 / 1550	MMF	2 km (1.2 mi)
IDS-105F-M1ST2D	Std	1 x Simplex ST	-15.0	0.0	-28.0	-8.0	13.0	1550 / 1310	MMF	2 km (1.2 mi)
IDS-105F-S1ST20U	Std	1 x Simplex ST	-14.0	-8.0	-32.0	-3.0	18.0	1310 / 1550	SMF	20 km (12.4 mi)
IDS-105F-S1ST20D	Std	1 x Simplex ST	-14.0	-8.0	-32.0	-3.0	18.0	1550 / 1310	SMF	20 km (12.4 mi)
IDS-105F-S1SC20U	Std	1 x Simplex SC	-14.0	-8.0	-32.0	-3.0	18.0	1310 / 1550	SMF	20 km (12.4 mi)
IDS-105F-S1SC20D	Std	1 x Simplex SC	-14.0	-8.0	-32.0	-3.0	18.0	1550 / 1310	SMF	20 km (12.4 mi)
IDS-105F-S1SC20U-XT	Ind	1 x Simplex SC	-14.0	-8.0	-32.0	-3.0	18.0	1310 / 1550	SMF	20 km (12.4 mi)
IDS-105F-S1SC20D-XT	Ind	1 x Simplex SC	-14.0	-8.0	-32.0	-3.0	18.0	1550 / 1310	SMF	20 km (12.4 mi)
IDS-105F-S1SC40U	Std	1 x Simplex SC	-8.0	-3.0	-33.0	-3.0	25.0	1310 / 1550	SMF	40 km (25 mi)
IDS-105F-S1SC40D	Std	1 x Simplex SC	-8.0	-3.0	-33.0	-3.0	25.0	1550 / 1310	SMF	40 km (25 mi)

Industrial Ethernet Switch Accessories
Panel Mount kit PM3	Brackets for attaching 30 to 45 mm wide Perle IDS industrial switches inside a control panel or to a wall for wall.
Rack Mount Kit RM4U	Bracket for mounting one or more Perle DIN Rail switches in a standard 19” rack. Occupies “4U” of vertical rack space. 275 mm ( 10 inches ) deep
UNO-PS/1AC/24DC/60W DIN-Rail Power Supply	UNO-PS/1AC/24DC/60W DIN-Rail Power Supply: 24 VDC, 60 Watt with universal 85 to 264 VAC, -25 to 70°C extended operating temperature. Power Supply Specifications.
UNO-PS/1AC/24DC/150W Power Supply	UNO-PS/1AC/24DC/150W Power Supply – DIN-Rail 24 VDC , 150 Watt power supply with universal 85 to 264 VAC, -25 to 70°C extended operating temperature. Power Supply Specifications.

info[at]center4.eu