More Information
Connect Tech’s Xtreme/GbE 24-Port Managed Carrier Ethernet Switch provides high density, high port count, Carrier Grade Ethernet switching capabilities in an extremely small embedded form factor. Excellent for any space constrained, mission-critical application needing an embedded high-density/high-port count managed Carrier Switch.
The Xtreme/GbE 24-Port Managed Carrier Ethernet Switch implements on-board magnetics for all 24 Gigabit Ethernet Ports, so no external magnetics are required for your end application. The Xtreme/GbE 24-Port also includes 1G SGMII and 2.5 SGMII uplinks. It has been designed from the ground up to ease enclosure/chassis integration by limiting the amount of cabling required for port termination with the ability to remove all cabling entirely.
The Xtreme/GbE 24-Port Managed Carrier Ethernet Switch uses a specialized high density Board-to-Board/Board-to-Cable configuration for port breakouts. Ports can be broken out via a breakout board / carrier that can mate directly to the XDG032/33 or by mating to a high density high-speed Twinax cable.
The XDG033 is designed for standalone applications, with all thermal extraction on one layer and connector/ cabling on the opposite layer, where as the XDG032 is intended for single side use case.
Specifications
| Ethernet Switch Engine | Vitesse VSC7429 Carrier Grade Ethernet Switch Chipset |
|---|---|
| Ethernet PHYs | 12 x Cu PHY Ports from Vitesse VSC7429 Switch Engine, 12 x Cu PHY Ports from Vitesse VSC8512 External PHY |
| Memory | 1Gb DDR2 SDRAM, 128Mb Serial NOR Flash |
| Ports | 1x 1G SGMII (for SFP Uplink), 1x 2.5G SGMII (for SFP Uplink), 24 x 1000BASE-T |
| Default Port Configuration | 24 x Gigabit Ethernet
1 x SFP 1 Gigabit 1 x SFP+ 2.5 Gigabit |
| Magnetics | On-board Gigabit Magnetics for all 24 Ports (No external magnetics required) (10/100/1000 Mbps) application |
| Connectors | 4 x High-Density Board-to-Board / Board-to-Cable Connectors, Connectors can be mated directly to breakout boards, or via cabling, Each High-Density Connector Contains 8 Gigabit Ports |
| Layer 2 Switching | 802.1Q VLAN switch with 8K MACs and 4K VLANs, Hardware and software-based learning, Independent and shared VLAN learning (IVL, SVL), IPv4/IPv6 multicast, Jumbo frame support, Link aggregation (IEEE 802.3ad), Policing with storm control and MC/BC protection, Push/pop up to two VLAN tags, RSTP and MSTP support |
| Management Access | RS-232 Serial Interface (CLI), SNMP, Software API, Web Interface |
| Breakout Board Options | 4-Port SFP Cabling Option to Right Angle SFP Cage, 8-Port Bank Cabling Options to: Panel Mount Vertical RJ-45s, Right Angle RJ-45s and MIL Circular Connector, Direct Board-to-Board (No Cabling): 24-Port Vertical RJ-45s, Full Custom (Simple 2-layer no magnetics designs) |
| Standalone Operation | Switch can be used as a standalone unit OR can be paired with an embedded SBC |
| Power Requirements | +4V to 14V Input Range (External Connector) |
| Power Consumption | Idle: 0.7A, 8.4W, Max: 1.15A, 14W (with +12V input), Typical: 0.85A, 10W |
| Dimensions | PC/104 compliant: 3.775″ x 3.550″, Tallest Top Side Component: Heatsink 0.375” (9.5mm) |
| Operating Temperature | -40°C to +85°C (-40°F to +185°F), (chipset rated to +125°C thermals) |
Ordering Information
| Main Products | |
|---|---|
| Part Number | Description |
| XDG032 | Xtreme/GbE 24-Port with SFP Top Side |
| XDG033 | Xtreme/GbE 24-Port with SFP Bottom Side |
| Cables/Accessories | |
| Part Number | Description |
| XBG009 | Xtreme/GbE SFP Breakout Board |
| DEV011 | XDG033 Development Kit (Includes breakout board) |
| XBG001 | 24-Port RJ-45 Vertical Breakout Board (XDG032 Only) |
| XBG002 | 8-Port Panel Mount RJ-45 Breakout Board (requires CBG209 or CBG210) |
| XBG003 | 8-Port Right Angle RJ-45 Breakout Board (requires CBG209 or CBG210) |
| CBG209 | XDG032 8-Port Breakout Cable |
| CBG202 | XDG032 Serial Cable |
| CBG112 | XDG032 Power Cable |
| CBG210 | XDG033 8-Port Breakout Cable |
| CBG212 | XDG033 Serial Cable |
| CBG213 | XDG033 Power Cable |
| MSG062 | 12V Power Supply w/ 3.5mm Terminal Block Adapter |
Custom Design
Looking for a customized Gigabit Ethernet Solution? Click here to tell us what you need.