More Information
Connect Tech’s Xtreme I/O Opto is a 48-bit isolated PCI-104 Digital I/O board grouped with 24 optically isolated inputs and 24 optically isolated outputs. The flexibility of the FPGA technology allows integration and customization to meet application requirements.
Fully PCI-104 compliant, Xtreme I/O Opto Digital I/O can be controlled directly from a memory mapped register set in any operating system.
The reliability of the Xtreme I/O Opto, along with the added protection provided by 3kV isolation on the Digital I/O ensures optimal performance and protection under extreme environmental conditions. Xtreme I/O Opto is ideal for PC/104 and other embedded technology applications in the military, aerospace, medical and industrial sectors.
Specifications
| Inputs | • 24 optically isolated inputs (24-bits)
• Wide input voltage range from +0 up to +40V DC • Independent grounds and reverse voltage protection • Selectable interrupt generation on any input signal (change of state, rising or falling edge) • 1.8kOhm current limiting series resistor on each input |
|---|---|
| Outputs | • 24 optically isolated outputs (24-bits)
• Wide output voltage range from +0 up to +40V DC • Open collector configuration with common emitters • Individual selectable output voltage levels with a 4.7kOhm pull up • Maximum output current: 8mA |
| Connectors | 2×25 (50 position) 0.1” (DIL) pin headers available in vertical or right angle |
| Optical Isolation | 3kV RMS |
| Control/Addressing | • FPGA Register Controlled Device (No jumpers needed)
• Custom logic available upon request |
| Operating Temperature | -40°C to +85°C (-40°F to +185°F) |
| Dimensions | PC/104 Compliant |
| Bus | ISA (PC/104) connector can be optionally installed as a pass-through connector, PCI-104 (PCI) option |
| Software Compatibility | • Custom CTI Device Drivers for QNX, Linux, Windows
• Device can also be controlled directly from a memory mapped register set in any operating system |
| Additional Product Numbers | DAG001, DAG002 |
Downloads for Xtreme I/O Opto – DAG001, DAG002
Drivers for Xtreme I/O Opto & Xtreme I/O Express ADC-DAC
| Operating System | Driver Information | Resources |
|---|---|---|
| Windows 10, Windows 8, Windows 8 64-bit, Windows 7, Windows Embedded Standard 7, Windows 7 64-bit, Windows XP, Windows XP Embedded, Windows XP 64-Bit | Name: winufd-v111.zip Version: 1.11 Released: 01.02.2016 |
Download Driver Install Guide |
| Linux 2.6 | Name: linufd-v005.zip Version: 005 Released: 11.05.2012 |
Request Driver |
| QNX 6 (Neutrino) | Name: ufd-qnx-install-101.tar.gz Version: 1.01 Released: 03.31.2014 |
Download Driver |
OS: QNX 6 (Neutrino)
Name: ufd-qnx-install-101.tar.gz
Version: 1.01
Released: 03.31.2014
Status: Production/Stable
OS: Linux 2.6
Name: linufd-v005.zip
Version: 005
Released: 11.05.2012
Status: Production/Stable
Available Upon Request
OS: Windows XP, Windows 7, Windows XP Embedded, Windows Embedded Standard 7, Windows XP 64-Bit, Windows 7 64-bit, Windows 8, Windows 8 64-bit, Windows 10
Name: winufd-v111.zip
Version: 1.11
Released: 01.02.2016
Status: Production/Stable
Drivers support:
Xtreme I/O Express: DAG103, DAG104, DAG106
Xtreme I/O Opto: DAG001, DAG002
Ordering Information
| Main Products | |
|---|---|
| Part Number | Description |
| DAG001 | Xtreme I/O Opto, PCI-104 |
| DAG002 | Xtreme I/O Opto, PC/104-Plus |
Custom Design
Looking for a customized FPGA product? Click here to tell us what you need.