More Information
Connect Tech’s PCI-104 to PC/104 Adapter allows for the testing and development of PC/104 (ISA) devices in a PCI-104 (PCI) only system. The PCI-104 to PC/104 Adapter converts transactions on the PCI-104 bus to PC/104 bus transactions (PCI to ISA).
Specifications
| Bus | Fully PCI 2.0 bus compliant, Jumpers not required for configuration or board detection |
|---|---|
| I/O | Separate PCI IO registers covering 3 fully customizable 256byte IO address ranges |
| Memory | PCI Memory mapped BAR covering the entire ISA memory mapped address range (0x00 0000-0xFF FFFF) |
| Eeprom Interface | On board eeprom loads customizable configuration parameters at boot time |
| Interrupts | PCI driven interrupt architecture monitors enabled IRQ input lines on the PC/104 bus |
| Digital I/O | 16-bit bidirectional I/O (optional)
Input/Output Ranges: Hardware selectable +3.3V or +5V (TTL/CMOS) High Current: 24mA |
| Dimensions | 95.885mm x 90.17mm (3.775″ x 3.550″), Fully PCI/104 compliant |
| Operating Temperature | -40°C to +85°C (-40°F to +185°F) |
| Operating Systems | Can be controlled directly from a memory mapped register set in any operating system |
Downloads for PCI-104 to PC/104 Adapter – ADG043
Drivers for PCI-104 to PC/104 Adapter
| Operating System | Driver Information | Resources |
|---|---|---|
| Linux 2.6 | Name: linufd-v005.zip Version: 005 Released: 11.05.2012 |
Request Driver Install Guide |
OS: Linux 2.6
Name: linufd-v005.zip
Version: 005
Released: 11.05.2012
Status: Production/Stable
Available Upon Request
Drivers Support: ADG043
Ordering Information
| Main Products | |
|---|---|
| Part Number | Description |
| ADG043 | PCI-104 to PC/104 Adapter |
Custom Design
Looking for a customized Development Tool or Adapter? Click here to tell us what you need.