The FarSync TE1 intelligent card provides an API or TCP/IP support over T1 or E1 G.703 and fractional T1 or E1 G.704 connectivity.
The intelligent FarSync TE1 card brings comprehensive E1 and T1 support
to Linux and Windows to allow your application full access to the E1 and T1 features available on the card. Full bandwidth on unstructured T1 and E1 G.703 lines, T1 and E1 fractional (G.703/G.704), HDLC framed and transparent operation are all supported with easy software configuration. The product includes a low level driver that allows access to the communications features available in the hardware. The card can optionally use the host’s standard TCP/IP protocol stack to allow access to IP based networks such as the Internet.
The FarSync SDK provides the Developers Toolkit for the product.
The G.703 transparent bitstream option available with the API is suitable for video and voice such as T-DMB (Digital Multimedia Broadcasting), DAB (Digital Audio Broadcasting) ETI (Ensemble Transport Interface – ETSI EN 300 799) and STI (Service Transport Interface – ETSI EN 300 797) using the BNC connectors.
A general purpose bitstream encoding and decoding library including DAB-ETI (NI, G.703) and DAB-STI (PI, G.703), support to reduce application development timescales is available with the FarSync SDK.
Both the RJ48C (RJ45) and twin
coax (BNC) connectors are available on the card so if you are not sure what connector
type is going to be required, use the FarSync TE1.
The product is supplied with a 5 year warranty.
Features under Windows:
The Windows based API common to the entire range of FarSync cards/devices is referred to as the FarSync Windows API (FsWinAPI). This is an extension of the MS COMM API and enables, for example, applications developed to support COM ports, to be easily ported to use FarSync support in E1, synchronous or asynchronous modes. This standardization enables the API to also be readily accessible from higher level environments such as .NET, C#, VB etc.
The FsWinAPI provides applications with direct access to the card’s communications port/s for bit sync (HDLC) framing and also transparent bitstream operation for video and voice type applications.
The FarSync TE1 can also be installed to appear as a NDIS (LAN) interface so it can simply use the TCP/IP stack over PPP to allow access to IP based networks such as the Internet.
The card installs seamlessly under Windows 10, 8, 7, Vista, Windows Server 2016, 2012 and 2008 on both 32 and 64 bit, single and multi-core systems. The FarSync drivers are signed by Microsoft for easy installation.
LabVIEW applications can access this adapter.
Features under Linux:
The API is based on the Char I/O interface and supports bit sync (HDLC) framed and transparent bitstream data. The TE1 card can also use the TCP/IP stack to allow access to IP based networks such as the Internet.
The TE1 card installs seamlessly as a plug and play device under the popular Linux 32 and 64 bit distributions. The cards supports Linux kernel versions 2.6.12 onwards in 32 and 64 bit formats, including the leading distributions supplied by Red Hat, SuSE, CentOS, Ubuntu, Debian, Fedora, Slackware and more. Multi-processor
systems are supported.
FarSite is committed to supporting the FarSync TE1 on new versions of Linux and Linux kernels as they are released. The
source code for the driver is supplied
with the product allowing rebuilding by the end user for use with
almost any of the current or future Linux variants. The driver supports both big-endian and little-endian memory storage formats.
The FarSync SDK provides a Developers Toolkit with full documentation, a DAB compatible bitstream encoding and decoding library, useful utilities, such as a line monitor, and many sample applications for Linux and Windows.
Free support from FarSite’s Engineering department is provided to customers purchasing the FarSync SDK who have technical questions using the API.
Applications for the FarSync TE1
The FarSync TE1 card is suitable for a very wide variety of applications, including for example:
- HDLC framing support for non standard or specialist protocols
- Interfacing DAB ETI (Ensemble Transport Interface – ETSI EN 300 799) and STI (Service Transport Interface – ETSI EN 300 797) transparent bit streams to Servers
- Integration with embedded Linux and Windows based products
- E1 Internet Access
- E1 access over Frame Relay
- Remote office access over leased lines
- Server-based network hub (Routers & Firewalls)
- Integration with embedded Windows and Linux based Products
- Satellite multicasting
- Video Teleconferencing
FarSync TE1 Product Details
The FarSync TE1 is supplied with software drivers for Windows and Linux. This includes a low level driver that allows access to the communications features available in the hardware and an optionally installable driver that connects with the standard TCP/IP protocol stack to allow access to IP based networks such as the Internet.
The drivers supplied with Windows and Linux allow large numbers of ports to be supported by the installation of multiple FarSync TE1 cards in a Server. Typically 12 or more cards can be supported; the card limit is only dependent on the PCI / PCI-X slot count and resources available in the host Server and the total bandwidth of the PCI bus.
The 1 port card runs an AMD processor with SRAM. The card has an embedded HDLC / transparent controller with SDMA access (128 buffers) and a wide range of timers. The whole memory space may be mapped via the PCI interface to the PC/Server.
The TE1 supports E1 unstructured (G.703) and Transparent operation at 2.048 Mbits/s,
E1 fractional (G.703/G.704) at speeds from 64 Kbits/s to 1.984 Mbits/s,
T1 unstructured (G.703) and Transparent operation at 1.544 Mbits/s,
T1 fractional (G.703/G.704) at speeds from 64 Kbits/s to 1.536 Mbits/s.
E1 Modes: HDLC-framed
or transparent data over G.703 unframed/unstructured or G.703/G.704 framed/structured Doubleframe
and CRC4 multiframe modes.
T1 Modes: HDLC-framed or transparent data over G.703 unframed/unstructured or G.703/G.704
framed/structured F4 (FT), F12 (D3/D4, SF), F24 (D5, Fe, ESF) and F72 ( SLC96) modes.
PCI Bus Specification
The FarSync TE1 card is suitable for systems with a PCI or PCI-X bus, covering single processor and multi-processor systems. The card is PCI revision 2.2 compliant with support for both 3.3 and 5 volt signalling, the power for the card is taken from the 3.3 volt supply rail. The FarSync TE1 card may be fitted in either 32-bit PCI bus slots or 64-bit PCI-X bus slots as this Universal PCI card will work perfectly well in both.
Key Features supported on Linux
The FarSync TE1 installs seamlessly under Linux kernel 2.6.12 onwards on both single and multi-core 32 and 64 bit systems. All the popular distributions are supported including Red Hat, SuSE, CentOS, Ubuntu, Debian, Fedora and Slackware.
Installation is simple, the driver is dynamically loadable so a kernel rebuild is not required for the driver to be installed. The link level protocol can be PPP, Cisco HDLC or Frame Relay with optional authentication by CHAP, MSCHAP or PAP (RFC 1334) providing a standard point-to-point network interface. The driver is supplied with source code.
The Char I/O API provides a programming language independent, high-level interface to the FarSync base driver it supports access to bit synchronous (HDLC) framed, transparent bitstream. The cards can also use the TCP/IP stack to allow access to IP based networks such as the Internet. It also allows selection of the full range of clock modes.
A configuration utility is provided to set the line speed, interface type and protocol, after which the ports may be configured with standard networking tools.
Key Features supported on Windows
The FarSync TE1 installs easily under Windows 10, 8, 7, Vista, Windows Server 2016, 2012 and 2008 on single or multi-core 32 and 64 bit systems. A FsWinAPI driver is installed with the optional installation of an NDIS (LAN) driver. The NDIS driver supports TCP/IP running over PPP with optional authentication by CHAP or PAP (RFC 1334) providing a standard point-to-point network interface. The drivers are signed by Microsoft for easy installation. Applications running in LabVIEW can access the card.
The product is supplied with a comprehensive configuration utility and its own Line Monitor that allows the user to record, display and store line traffic with WAN protocol decoding for fast debugging.
The FarSync TE1 FsWinAPI allows applications developed using the FarSync SDK to exactly control the type of data sent and received in bit sync (HDLC framed) data and transparent bitstream formats.
The Farmon utility allows all data sent and received on the line to be recorded.
The product is supplied with a high performance multi-channel line monitor that allows the user to record, display, store and replay line traffic with protocol decoding (see sample screen). Comments can even be inserted into the line trace to assist later analysis.
The FarSync TE1 product includes:
- The TE1 communications card,
- Documentation supplied on CD-ROM,
- A quick start guide,
- RJ48C (RJ45) 2
- Windows and Linux driver software (source code is provided
for Linux driver)
New versions of the software are made available from the support page as they are released.
FarSync SDK – The Developers Toolkit
The SDK includes support for writing applications on both Linux and Windows and contains documentation, working sample applications, development and test utility applications. There is everything a user needs to rapidly develop and test a wide variety of applications such as specialist sync (HDLC framed) protocols or transparent bitstream data requirements including Audio, MPEG Video T-DMB, DAB ETI and DAB STI with a bitstream encoder and decoder library.
The FarSync SDK is ordered separately from the FarSync TE1.
Our Engineering department provides free email and telephone assistance to application developers using the API as part of the package provided when the FarSync SDK is purchased.
See details on the FarSync SDK Developers Toolkit and the APIs supported.
Free 3rd party applications: The Open Digital Radio DAB/DAB+/T-DMB multiplexer, very good site for DAB developments.
About and source code for the Open Digital RadioDAB/DAB+/T-DMB multiplexer. See also Open Digital Radio.
|Card type /
|AMD processor with SRAM and FALC56 E1/T1 comms controller,
Universal PCI (PCI-X compatible,
PCI v2.2 compliant), bus mastering, DMA enabled,
Supports 3.3 & 5 volt PCI signalling,
Suitable for 32 and 64 bit PCI bus slots
|Physical characteristics||Short card (height 107mm, length 167mm)|
|Multiple cards||Typically 12 or more cards can be supported; the card limit is only dependent on the resources available in the host Server|
|Network connectors||E1: 120-ohm RJ48C (often referred to as RJ45) or Twin 75 ohm BNC
T1: 100-ohm RJ48C (RJ45)
|Network connections supported||E1 unstructured (G.703) : 2.048 Mbits/s
E1 fractional (G.704): 64 Kbits/s to 1.984 Mbits/s
T1 unstructured (G.703): 1.544 Mbits/s
T1 fractional (G.704): 64 Kbits/s to 1.536 Mbits/s
|E1 frame structure and modes||E1 – HDLC-framed or transparent data over G.703 unframed/unstructured or G.703/G.704 framed/structured Doubleframe and CRC4 multiframe modes|
|T1 frame structure and modes||T1 – HDLC-framed or transparent data over G.703 unframed/unstructured or G.703/G.704
framed/structured F4 (FT), F12 (D3/D4, SF), F24 (D5, Fe, ESF) and F72 ( SLC96) modes
|G.706 features||CRC4 to non-CRC4 interworking according to ITU-T G.706 Annex B (E1)
Error checking via CRC4 procedures according to ITU-T G.706 (E1)
Error checking via CRC6 procedures according to ITU-T G.706 and JT G.706(T1)
|ESD protection||Sidactor and telelink fuse, designed for
zero maintenance. The FarSync TE1 uses solid state fuses unlike
many E1 interface cards, no parts need to be replaced after a survivable
|Cables||2 metre RJ-48C cable included|
|Back panel indicators||LEDs for Port open, Loss of Signal (LOS), Receive Remote
Alarm (RRA), Alarm Indication Signal (AIS)
|Approvals||EN55022 class B, CE, FCC class B, TBR12 and TBR13|
|Power requirements||< 1.4 Amp @ +3.3v < 5 watts|
|Operating Temperature Range||0–60°C ambient air temperature.
Note: a higher temperature range version -20 to +60°C ambient air temperature is available as an option, contact us for details.
|MTBF||273,220 Hours – Bellcore Method 1 Case 3, 40 deg.C
ambient, 15 deg.C case temperature rise above ambient
|FarSync TE1||Intelligent 1 port E1 / T1 card, Universal PCI with BNC and RJ48C (RJ45) connectors, includes an API for customer applications and support for TCP/IP operation.
Includes a 2 metre cable with RJ48C Connectors.
Supplied with drivers for Linux and Windows.
To develop applications that will use the API the FarSync SDK should be ordered.
|FarSync SDK||Linux and Windows Developers Toolkit for the FarSync TE1 and other FarSync cards – this is required if you want to write software to use the card’s API.||FS9610|